Hi Bunny; thanks for the question and the answer is no, the MORryde Jerry Can Mount for Jeep Wrangler JL # MR87UR won't interfere with the opening of your Jeep's door. view full answer...
No, the Bestop Soft Lower Half Doors for Jeep # B5302815 will not work with the Rampage upper door frame supports. These half doors will only work with the factory upper door supports without steel door striker pins. view full answer...
Hi Steve; we do indeed have replacement hardware for the Curt hitch that fits your 2000 Jeep Cherokee; what you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter the hitch part number in the "Hitch Item Number" box and you're set. The two Curt hitches that fit your Jeep are parts # 13084 and # 13160. If you take a look at the photos of the hitches below you should be able to compare them to what is on your Jeep to... view full answer...
The Blue Ox Tow Bar Wiring Kit BLU86XR you mentioned is actually designed to fit 2014-2022 Jeep Grand Cherokee's with a tow package, as well as a 2022 Jeep Grand Cherokee without a tow package. With that being said, this kit is not going to be the correct kit for your 2021 Jeep Wrangler, unfortunately.
Instead, what you're going to need instead is the Curt Custom Tail Light Wiring Kit for Towed Vehicles # C96JR.
This is going to be the same wiring harness as the Blue Ox Tow Bar Wiring... view full answer...
I know it reads a bit confusing Justin, but the Rampage Trail Top All-Season 2-in-1 Soft Top Kit for Jeep # RA106035 does come with the door surrounds, windshield bar, tailgate bar, and support bows. view full answer...
Hi Robert,
There unfortunately isn't a list of aftermarket bumpers that are compatible with your Blue Ox Base Plate Kit # BX1139 you have on your 2020 Jeep Wrangler. You could try asking Blue Ox but they likely have only tested it with factory bumpers. If you find a bumper you'd like to install then you'll just need to see if the mounting points for the bumper would interfere with the mounting of the baseplate and then if the arms of the baseplate will clear the bottom of the bumper. view full answer...
All of the base plates for your 2014 Jeep Wrangler are going to require drilling. I do recommend going with the Roadmaster # RM-521448-5 which offers the direct connect arms. I prefer Roadmaster as they test their products more than any other manufacturer which is why they are one of the only manufacturers which do not require you to use a safety cable around the base plate and to the frame on your Jeep.
The Roadmaster Nighthawk All-Terrain Tow Bar # RM-676 is our best seller with the... view full answer...
Hey John,
I completely agree with your opinion of our search bar. I have to use it all day long and hate how it functions. We've brought this issue up quite a bit on our side and were told that the search bar is being worked on and should improve in the near future. If you can't find something just send in a question and we'd be happy to search for it for you, which I do understand isn't the most convenient.
As for the door skin, we do not currently offer it so I recommend looking up... view full answer...
Hey Keith, thanks for reaching out!
Yes, you can mount the Thule RodVault 2 Rooftop Fly Rod Carrier # TH27YV hanging below the crossbars on your 2023 Jeep Wrangler 4xe. I've confirmed this with my contact at Thule. view full answer...
If you don't want to tap into your 2018 Jeep JL Wrangler's wiring to tow and your top does not have any metal for our magnetic lights, then we have one other option available for you, the Demco LED Light Bar for Towed Vehicles w/ Wireless Transmitter # DM36MV.
This light bar uses suction cup to attach to the roof or trunk and has a secondary connection by straps. This may work for your soft top, but I would suggest finding something with a suction cup on your roof first to test how well... view full answer...
Hi Ken; the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # JB0892 fits the 2018 Jeep JL Wrangler Unlimited hard top as well as the 2024 Wrangler Unlimited hard top so you will be able to carry it over to your Rubicon X. I have attached a link below to our list of local dealers in the Nashville area that could install the rack for you. I used 37201 as the zip but you can change it as needed. view full answer...
Unless you wrote down the key number in a manual for your Rhino-Rack loading system we have no way to know what key you have. If you can get a locksmith to remove the Lock # RRRBCA025 you could then order a new lock with new keys. view full answer...
I definitely have a creative solution for you, Kelly!
Initially I was looking at the roof rack as well, but since your 2023 Jeep Grand Cherokee L uses fixed mounting points there isn't a way to adjust the kayak carriers forward. Since we can't mess with the roof side of the equation we can actually look at your connection with your trailer instead and how we can increase the space between your Jeep and your 2020 20FBS Geo Pro.
Your trailer will have a GVWR (gross vehicle weight rating)... view full answer...
Since they both ( # RM-1139-149 & # RM25VR ) will work with your 2023 Jayco Precept 34G you're going to need to take a look at your current ones and measure the bar diameter and pick one that matches.
When picking out anti-sway bars, the key is the thicker the bars the better they'll preform, which is why I recommend checking what you have first so you can be sure these'll be an upgrade. view full answer...
You are on the right track but you need to use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item # 325-GH-315 instead. This ball mount is rated to be used with a flat towing set up and a bike rack.
The Gen-Y Phantom Hitch Ball Mount item # GY27VR can only be used with Gen-Y accessories. It's not built strong enough to support a flat towed vehicle and a bike rack.
If you don't have any intention of using the ball mount to tow a trailer, then I recommend just getting the Replacement... view full answer...